News

  • Maintenance and maintenance of high-speed mixer

    Maintenance and maintenance of high-speed mixer

    When the high-speed mixer is in use, maintenance procedures should be formulated. In addition to the general equipment maintenance rules, the following matters must be noted: ①It must be carried out in accordance with the operating procedures of the equipment. This is a good maintenance of the equip... Read More

    26-05-2021 News
  • What are the functional uses of the plastic granulator?

    What are the functional uses of the plastic granulator?

    Function: With special screw design and different configurations, it is suitable for the production of PP, PE, PS, ABS, PA, PVC, PC, POM, EVA, LCP, PET, PMMA and other plastics for recycling and color mixing granulation. The gearbox adopts a high-torque design to achieve noise-free and stable operat... Read More

    21-05-2021 News
  • Production method of twin screw extruder

    Production method of twin screw extruder

    Our common twin-screw extruders are equipped with a double-wrist conjugate feeding system for feeding, so that large pieces of material can be directly put into the feeding hopper, and the material is forced through the double-wrist wheel. Mandatory eating into the screw barrel to complete the feedi... Read More

    14-05-2021 News
  • Type and cleanliness of twin screw extruder

    Type and cleanliness of twin screw extruder

    Before using a twin-screw extruder, we must first understand what kind of extruder we need, because there are many different types of machines on the market according to our different needs, so what types of these machines are there? ? There are mainly three types: co-directional meshing type, diffe... Read More

    06-05-2021 News
  • What are the three precautions for twin screw extruders?

    What are the three precautions for twin screw extruders?

    1. Structural principles The basic mechanism of the extrusion process is a screw that rotates in the barrel, pushing the plastic forward. The spiral structure is a slope wound on the center layer, the purpose of which is to increase pressure to overcome greater resistance. As far as the extruder is ... Read More

    30-04-2021 News
CONTACT US