News

  • How to choose a gearbox for a screw extruder?

    How to choose a gearbox for a screw extruder?

    When choosing a Gearbox for a Screw Extruder, you need to take the material's weight into account as well as its type, feed rate and geometry. In order to accommodate this load, there are two types of bearings: radial and thrust. Thrust bearings are generally mounted on the output shaft of the gearb... Read More

    26-08-2022 News
  • What are the applications of Meltblown Extruder Screw Barrel?

    What are the applications of Meltblown Extruder Screw Barrel?

    Cold feed screw extruder The cold feed screw extruder from Meltblown is an excellent choice for the manufacture of plastics. The screw design enables it to process a wide range of materials. The barrel structure and screw shape can be customized for the specific process requirements. The screw and b... Read More

    19-08-2022 News
  • What is a screw extruder gearbox?

    What is a screw extruder gearbox?

    What is a screw extruder gearbox, how does it work, and what are the common types of failures. Gearboxes are an integral part of a Screw Extruder. These devices are used to drive the screw to impart torque in order to overcome the friction in the extruder process. The gearboxes are used to convey hi... Read More

    12-08-2022 News
  • The extruder barrel screw is a common part of 3D printers

    The extruder barrel screw is a common part of 3D printers

    The extruder barrel screw is a common part of 3D printers. However, its design is not simple. Various factors affect the life of the screw, including the lubrication film and the Bimetallic screw. Extruders The extruder barrel screw is a critical part of the plastics production process. The screw's ... Read More

    05-08-2022 News
  • What factors need to be considered when choosing an injection molding barrel screw?

    What factors need to be considered when choosing an injection molding barrel screw?

    When choosing an injection molding barrel screw, there are several considerations to consider. First, the feedthroat temperature must be adequate. Too cold and volatiles will condense inside the barrel. Too hot, and a melt film will form between the flight and the barrel wall. Trapped air can also c... Read More

    22-07-2022 News
CONTACT US